Name: Smart Living Mechanical Timer
Brand: Smart Living
Rating: 0 (0 reviews)

Characteristics Smart Living Mechanical Timer.

ItemMaster Dimensions

Length, IN	2.23
Height, IN	6.96
Width, IN	4.6
Weight, LB	0.25

special attributes

Units In Package	1
Package Type	PACKAGE
Package Size, CT	1.0
Country Of Origin	China
Seasonal	N
Temperature Indicator	Shelf Stable
Peg Down	0.660
Peg Right	2.260
Directions	To operate: Push pins down for on time Pull pins up for off time. Instructions: 1. Locate an electrical outlet that is close to the device you want to control. 2. Put the "on/timer" switch located on the top of the unit to the "timer" position and plug the timer into the outlet. 3 Set the current time - turning clockwise align arrowhead (see diagram) on the dial of the timer to the present time (lines under the numbers are in increments of 30 minutes). There is no need to touch the pins to set current time. Note: Dial is based on AM/PM. 4. The black timer pins on the outside of the dial control the timer's on times and off times. The timer pins are preset in the pushed down position, which means connected devices would be on. If the pins are pulled up, connected devices during those times would be off. Determine your desired start time and push down all pins until desired off time. For example: To turn the timer on at 5pm and off at 10pm, push down all the pins between 5pm and 10pm. You can set multiple on and off times. You could set the timer to turn on lights at 5pm, oft at 10pm, on again at 5am, off again at 8am, etc. 5. Plug your electrical device directly into the timer. The electrical device must be set to "on" position for the timer control to work properly. 6. The switch on top of the timer must be set to the timer position for the timer function to work. You may override operation of the timer by setting the "on/timer" switch (located on top) to on. Be sure to set switch back to timer for proper timer function. In case of power failure, reset the time of day as indicated in step 2 above. Limitations of timing devices: Timing devices require power to function properly. If AC power to the timer is out off, a light or other device plugged into the timer will not work. Notes: The unit you are plugging into the timer has to be on. Make sure AM and PM are correct on the current time and in the program settings.
Marketing Description	Ahold™ Smart Living™ Mechanical Timer. ETL listed. Intertek. Easy to setup and use. 125VAC/60Hz/15A/1875W resistive. 8A/1000W tungsten. 500VA electronic ballast. 1/2HP motor load.
Other Description	Mechanical timer. 1-outlet 24hr mechanical pin timer. 1 polarized outlet. 48 pin setting dial. Slide pin construction prevents lost pins. Manual ON override switch. ETL approved for CFL bulbs. See warnings, instructions and warranty inside of package. Quality guaranteed or your money back. 1 polarized outlet. Rated: 125VAC/60Hz/15A/1875W resistive (applicance). 8A/1000W tungsten (incandescent). 500VA electronic ballast. 1/2HP motor load. 1-877-846-9949. ©2015 Ahold Licensing Sarl.
Ecommerce Description	Smart Living™ Mechanical Timer. Easy to setup and use. 1-outlet 24hr mechanical pin timer. its slide pin construction prevents lost pins.