Name: Nasacort Allergy 24 HR Multi-Symptom Nasal Allergy Spray
Brand: Nasacort
Rating: 0 (0 reviews)

Characteristics Nasacort Allergy 24 HR Multi-Symptom Nasal Allergy Spray.

ItemMaster Dimensions

Length, IN	1.167
Height, IN	4.753
Width, IN	4.624
Weight, LB	0.105

special attributes

Units In Package	1
Package Type	PACKAGE
Package Size, FL OZ	0.37
Net Weight, FL OZ	0.37
Country Of Origin	France
Seasonal	N
Ingredients	Active Ingredient (in each Spray) - Purpose. Triamcinolone Acetonide (Glucocorticoid) 55mcg - Nasal Allergy Symptom Reliever. Inactive Ingredients: Benzalkonium Chloride, Carboxymethylcellulose Sodium, Dextrose, Edetate Disodium, Hydrochloric Acid or Sodium Hydroxide (for pH Adjustment), Microcrystalline Cellulose, Polysorbate 80, Purified Water.
Temperature Indicator	Shelf Stable
Ndc Code	41167-5800-3
Directions	Read insert (inside package) on how to: Get a new bottle ready (primed) before first use. Prime bottle again if not used for more than 2 weeks. Use the spray. Clean the spray nozzle. Adults and children 12 years of age and older: Once daily, spray 2 times into each nostril while sniffing gently. Once your allergy symptoms improve, reduce to 1 spray in each nostril per day. Children 2 to under 12 years of age: The growth rate of some children may be slower while using this product. Talk to your child's doctor if your child needs to use the spray for longer than two months a year. Children 6 to under 12 years of age: An adult should supervise use. Once daily, spray 1 time into each nostril while sniffing gently. If allergy symptoms do not improve, increase to 2 sprays in each nostril per day. Once allergy symptoms improve, reduce to 1 spray in each nostril per day. Children 2 to under 6 years of age: An adult should supervise use. Once daily, spray 1 time into each nostril while sniffing gently. Children under 2 years of age: Do not use. Do not use more than directed. If you forget a dose, do not double the next dose. Do not spray into eyes or mouth. If allergy symptoms do not improve after one week, stop using and talk to a doctor. Do not use for the common cold. Shake well before each use. Other information: Do not use if sealed package is torn or opened. Keep package and insert. They contain important information. Store between 20 degrees - 25 degrees C (68 degrees -77 degrees F). Read insert (inside package) for complete instructions on how to: Get a new bottle ready (primed) before first use. Prime bottle again if not used for more than 2 weeks. Use the spray. Clean the spray nozzle. Before first use, a new bottle must be primed. Shake well before each use. Important information: Read both sides of this insert for complete instructions on how to get a bottle ready (primed), how to use the spray bottle and how to clean the spray nozzle. Keep this insert as it contains important information. Steps to get a new bottle ready for use (primed): 1. Before first use, a new bottle must be primed. A. Remove cap (figure A). B. Shake bottle. C. Press and release spray nozzle until a fine mist is produced (as shown in figure B). This may take several times. Take care not to spray in face. Prime bottle again if not used for more than 2 weeks. Repeat steps for priming a bottle (see above). Use instructions: 1. Blow nose gently to clear nostrils. 2. Remove cap, then shake bottle. 3. Hold bottle with thumb under bottle and spray nozzle between fingers (as shown in figure B). 4. Press against the outside of your nose with your finger to close off one nostril (as shown in figure C). 5. Place the tip of the spray nozzle into the other nostril. The spray nozzle should not reach far into the nose. Aim nozzle toward back of nose (as shown in figure C). Do not spray toward nasal septum (the wall between the 2 nostrils) (as shown in figure D). Correct position. Wrong position. 6. While sniffing gently, spray into nostril. Important: for complete dosing instructions, see "directions for use" on next side. 7. Repeat steps "4" through "6" for the other nostril. 8. After using the nasal spray, wipe nozzle with a tissue and replace cap by pressing it down over the spray nozzle. Note: avoid blowing nose for 15 minutes after use. If nozzle does not spray properly, see cleaning instructions on next side. Directions for use: Before first use, you must get a new bottle ready (primed). If bottle is not used for more than 2 weeks, prime bottle again. If pump does not spray properly, the nozzle may be blocked. 1. Never try to unblock nozzle with a pin or any other object (as shown in figure E). 2. Clean the nozzle as shown below. Cleaning instructions: 1. Gently pull spray nozzle away from bottle (as shown in figure F). 2. Rinse spray nozzle only under warm water (as shown in figure G). 3. Shake or tap to remove excess water. 4. Re-attach spray nozzle to bottle. 5. Press and release spray nozzle until a fine spray is produced, taking care not to spray i
Marketing Description	Nasacort® Allergy 24hr Multi-Symptom Nasal Allergy Spray. Original prescription strength. Triamcinolone acetonide (glucocorticoid) 55mcg per spray/nasal allergy symptom reliever. 24 hr. Relief of: Nasal congestion. Sneezing. Runny nose. Itchy nose.
Other Description	Questions or comments? Call toll-free 1-800-633-1610. Uses: Temporarily relieves these symptoms of hay fever or other upper respiratory allergies: Nasal congestion. Runny nose. Sneezing. Itchy nose. Prescription strength allergy relief. Without a prescription. 24 hour symptom relief from indoor & outdoor allergies. Where can I get more information? 1-800-633-1610. ©2013 Chattem, Inc. ©2015.
Ecommerce Description	Nasacort® Allergy 24 HR Multi-Symptom Nasal Allergy Spray. It uses temporarily relieves these symptoms of hay fever or other upper respiratory allergies like Nasal congestion, Runny nose, Sneezing, Itchy nose. It has original prescription strength.