Name: Cake Mate Decorating Tips - 8 CT
Brand: Cake Mate
Rating: 0 (0 reviews)

Characteristics Cake Mate Decorating Tips - 8 CT.

ItemMaster Dimensions

Length, IN	1.112
Height, IN	5.962
Width, IN	4.503
Weight, LB	0.05

special attributes

Units In Package	8
Package Type	CARD
Package Size, CT	8.0
Country Of Origin	USA
Temperature Indicator	Shelf Stable
Peg Down	0.397
Peg Right	2.245
Directions	Simply attach these tips to any Cake Mate® pouch or tube icing to easily create delicious desserts! Hand wash only with warm soapy water before first use and after each use. Practice page: Use this space to practice making icing shapes, lines and letters. Simply place wax paper over this board and using the tips, perfect your decorating technique. Tip position (holding the icing): The angle of the tip as you hold it above the dessert surface effects the shape and form of your decorations. The two angles to use when piping are 90 degrees and 45 degrees. 90 degrees angle: 90 degrees angle is straight up, perpendicular to the dessert surface. Use when making drop flowers, stars, dots, and swirls. 45 degrees angle: 45 degrees - halfway between 90 degrees and dessert surface - is for making most designs, borders ruffles, flowers, pulled dots and writing. Creating icing decorations: To make lettering and lines using #3 tip or to make outlines using #5 tip: 1. Angle: hold icing at a 45 degrees angle. 2. Pressure touch tip to surface to attach, lift tip slightly and glide along with steady, even pressure, keeping wrist straight. 3. Release: stop squeezing, touch tip to surface and pull away. Tip: use a toothpick to draw your letters, then trace with the icing. To make dots and balls using #3, #5, #12 tips: 1. Angle: hold icing at 90 degrees angle. 2. Pressure with tip slightly above surface squeeze with steady even pressure, keeping tip point slightly in the piped icing dot. 3. Release: stop pressure, pull tip up and to the side, using tip to shave off any point. To make leaves, leaf border, ruffles using #352 tip: 1. Angle: hold icing at 45 degrees angle. 2. Leaf and leaf border pressure: start with heavy pressure, transition to light midway through leaf design. 3. Ruffles pressure: lightly touch surface with tip, alternate pressure between light and heavy to create ripples while gliding along surface. 4. Leaf and ruffles release: stop pressure, pull tip away from icing. 5. Leaf border release: stop pressure and pull tip away. Complete one leaf design and then overlap the start of next leaf over the first and repeat. Tips instructions: To make petals using #97 tip: 1. Angle: hold icing at 45 degrees angle. 2. Pressure: touch surface with wide end of tip anchoring tip to the surface. Rotate and lift upper edge of tip to create curve. 3. Release: stop pressure, touch base of tip to surface and pull away. To make ruffles using #97, #104 tips: 1. Angle: hold icing at 45 degrees angle. 2. Pressure: position tip with the wide end of tip lightly touching surface, the narrow end facing down and the tip opening away from surface. Glide with steady pressure moving your wrist up and then down to create ruffle. 3. Release: touch tip to surface, stop pressure and pull away. To make bows using #104 tip: 1. Angle: hold icing at 45 degrees angle. 2. Pressure: with wide end of tip touching surface, and narrow end straight up, start at center of bow, squeeze evenly and move tip up and around to left and back to starting point, creating a loop reverse to create second loop of bow to complete bow with streamers, start at center and squeeze two streamers. 3. Release: stop squeezing, touch tip to surface and pull tip away. Tip: use toothpick to draw bow shape, then trace with icing. To make stars using #18 tip: 1. Angle: hold icing at 90 degrees angle. 2. Pressure: keep tip above surface and increase or decrease pressure to control size of star. 3. Release: stop pressure completely before pulling tip straight up and away. To make shells and shell borders using #18 tip: 1. Angle: hold icing at 45 degrees angle. 2. Pressure: with tip slightly above surface, apply firm pressure allowing icing to fan out then gradually lower tip to surface. 3. Shell release: relax pressure and pull tip along surface to form a point. Stop pressure and pull tip away. 4. Shell border release relax pressure and pull tip along surface to form a point. Stop pressure and pull tip away. Start second shell about 1/4 inch away from tail of previous shell and repeat. To make drop
Marketing Description	Cake Mate® Decorating Tips. Creative decorating ideas on back! ABC. #3 tip. Lettering, dots, lines. #97 tip. Petals, ruffles. #5 tip. Outlines, dots, beads, balls. #104 tip. Bows, ruffles. #352 tip. Leaves, borders, ruffles. #18 tip. Stars, shells, borders. #12 tip. Dots, beads, balls. #2D tip. Drop flowers, rosettes. 8 decorating tips.
Other Description	®Cake Mate is a registered trademark of Signature Brands, LLC. Consumer inquiries: 1-877-726-8793. ©2014 Signature Brands, LLC.
Ecommerce Description	Cake Mate® Decorating Tips. adds that special touch to your treats with Cake Mate® Decorating Tips.